Peugeot
311 campaigns
Safety recalls for Peugeot.
311 campaigns
European Union
Peugeot 208
null The fixing screws of the wheel axles on the rear cross member may not be tightened correctly. As a result, they could loosen leading to a loss of vehicle control while driving.
European Union
Peugeot iON
null A problem with an internal component of the passenger airbag deployment module could prevent the passenger airbag from being deployed in the event of a crash.
European Union
Peugeot 208
null The front axle may not have been assembled with the correct tightening torques. As result, parts of the front axle could become loose leading to impaired steering capacity of the vehicle.
European Union
Peugeot Kisbee, Streetzone
null There may be a crack in the left-hand side tube of the chassis between the engine mounting and the lower arch. This may cause a break, which could lead to the chassis collapsing.
European Union
Peugeot 4008
null Due to corrosion, the dampers of the rear door could break. This could result in the rear door failing to stay in the open position, leading to injuries to the user.
European Union
Peugeot 4008
null Water can enter the vent mechanism for the front windscreen-wiper motor. This could result in the windscreen-wiper motor becoming completely blocked because of internal corrosion.
European Union
Peugeot 5008
null The fixing screws of the wheel hubs on the rear cross member may not be tightened correctly. As a result, they could loosen which could lead to a loss of vehicle control while driving.
European Union
Peugeot 3008, 5008
null The starter motor supply terminal may come into contact with an engine component. This could lead to damage to the supply terminal and to a short circuit.
European Union
Peugeot Traveller, Expert
null Because of the incorrect positioning of the power terminal on the starter during assembly, wear of the electric starter cable could occur which could lead to a short-circuit. As a result, it may be impossible to start the vehicle.
European Union
Peugeot 3008 - 5008 - 308 - 3008 - 508
null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of the electric starter cable and the risk of a short-circuit occurring.
European Union
Peugeot Traveller and Expert
null The brackets for the air conditioning compressor have not been assembled properly. As a result, the air conditioning compressor could fall on to the road endangering following vehicles.
European Union
Peugeot 3008
null The fixing studs for the curtain airbags are not welded properly. This could cause a curtain airbag malfunction in the event of a lateral impact.
European Union
Peugeot 208
null A failure in the manufacturer’s gluing process when assembling the rear spoiler could lead to parts of the spoiler detaching while the vehicle is moving, causing a hazard for following vehicles.
European Union
Peugeot 208, 2008, 508, Partner, Expert
null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by the driver.
European Union