RECALLS
32980 official campaigns
Safety recalls for cars and light vehicles, collected from NHTSA in the United States, EU Safety Gate, and the UK DVSA file.
32980 campaigns
United States
United States
HERDAN CORPORATION
THE RIM SIZE IS NOT STATED ON THE TIRE AND RIM LABEL. THIS IS A FAILURE TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO.
United States
Chrysler (FCA US, LLC)
ROAD WHEELS WITH OVERSIZED MOUNTING HOLES MAY HAVE BEEN INSTALLED ON THE AFFECTED VEHICLES. OVERSIZED HOLES COULD CAUSE INADEQUATE TIGHTENING OF THE WHEEL TO THE HUB, LOOSENESS OF THE WHEEL, AND POSSIBLE SEPARATION OF THE WHEEL FROM THE VEHICLE.
United States
United States
MONTGOMERY WARD & CO.
DUE TO INCORRECTLY INSTALLED MOUNTING BRACKETS, THE TWO CRASH BARRIERS, LOCATED ON THE RIGHT AND LEFT SIDES AHEAD OF THE FRONT SEATS ON THE INVOLVED BUSES, DO NOT MEET THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 222, "SCHOOL BUS PASSENGER SEATING AND CRASH PROTECTION".
United States
Volkswagen Group of America, Inc.
CERTAIN VEHICLES WERE ASSEMBLED WITH AN INSUFFICIENT HEIGHT DIFFERENTIAL BETWEEN THE ACCELERATOR AND BRAKE PEDALS.
United States
Ford Motor Company
FUEL SUPPLY TUBES INSTALLED IN THE AFFECTED VEHICLES ARE TOO SHORT. CONSEQUENTLY, FLEXIBLE HOSES THAT ATTACH TO THE TUBES MAY BE TAUT AND THIS WOULD HAVE AN ADVERSE EFFECT ON THE DURABILITY OF HOSE CONNECTIONS.
United States
Ford Motor Company
THE INVOLVED VEHICLES WERE ASSEMBLED WITH BOLTS OF AN INCORRECT SIZE FOR ATTACHMENT OF THE FRONT ENGINE MOUNTS TO THE ENGINE. THE ENGINE MOUNT BOLTS WILL LOOSEN AND EVENTUALLY FALL OFF AND THE ENGINE MAY COME OFF ITS FRONT ENGINE MOUNTS.
United States
RENAULT, INCORPORATED
ON CERTAIN VEHICLES, THE WIRING SYSTEM IN THE ENGINE COMPARTMENT MAY HAVE BEEN IMPROPERLY ROUTED. IF SO, THE WIRES MAY COME IN CONTACT WITH SOME OF THE ENGINE COMPARTMENT COMPONENTS.
United States
Honda (American Honda Motor Co.)
HANDLEBAR TUBE AND HANDLEBAR ARM DO NOT FIT SECURELY BECAUSE THE INSIDE DIAMETER OF THE HANDLEBAR TUBE IS INCORRECT. THIS CAUSES STRESS TO BEAR DIRECTLY ON A PIN.
United States
R&R CUSTOM COACHWORKS,INC
A TYPOGRAPHICAL ERROR FOUND ON CURRENT EXISTING LABELS STATES THAT THE GROSS VEHICLE WEIGHT IS 13,500 LBS. United StatesKawasaki Motors Corp., U.S.A.
DUE TO A MANUFACTURING DEFECT, THE FRONT WHEEL MAY DEVELOP CRACKS NEAR THE CONNECTION OF SPOKES AND THE HUB. CONTINUED USE COULD RESULT IN COMPLETE WHEEL FAILURE.
United States
General Motors, LLC
IN A VEHICLE IMPACT FROM THE REAR, THE THREE PIECE HOSES COULD SEPARATE AND RESULT IN FUEL LEAKAGE IN EXCESS OF THE AMOUNT PERMITTED BY FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 301, "FUEL SYSTEM INTEGRITY". United StatesGeneral Motors, LLC
PLATFORM TRAILER HITCHES WERE PRODUCED FROM OTHER THAN PURE STEEL. CONSEQUENTLY, THE HITCH WILL NOT WITHSTAND NORMAL STRESSES.
United States