Brands Cars Engines Gearboxes Platforms

SEARCH

Yamaha

164 campaigns
  • United States
  • European Union
  • United Kingdom

Safety recalls for Yamaha.

164 campaigns

United States

Yamaha Motor Corporation, USA

Yamaha Motor Corporation, USA (Yamaha) is recalling certain model year 2013-2015 Yamaha XT250 motorcycles manufactured August 1, 2012, to October 1, 2014. The affected motorcycles contain an air induction pipe and hose which may fail after prolonged periods of high RPM operation.
European Union

YAMAHA / MBK YN 50F

null The support bracket connecting the engine to the frame may crack because of insufficient welding in the main fixture points. Consequently, the engine mounting could split, resulting in a misalignment of the drive unit and/or of the rear wheel and making the vehicle impossible to control.
European Union 2014

Yamaha XT660R, XT660X and XT660Z

null The spark plug goes 6 mm too deep into the combustion chamber, which may damage the engine through detonation. This can lead to engine failure and stopping while driving.
European Union

Yamaha MT-09

null Due to the incorrect length of the cable, when the handlebars are turned several times, the cable of the front light may break, and the motorcycle would be suddenly left without front lighting.
United States

Yamaha Motor Corporation, USA

Yamaha Motor Corporation, USA (Yamaha) is recalling certain model year 2015 FZ07 motorcycles manufactured May 1, 2014, to September 30, 2014. In the affected motorcycles, the positive battery cable may be pinched between the seat base and seat bracket.
United States

Yamaha Motor Corporation, USA

Yamaha Motor Corporation, U. S.
United States

Yamaha Motor Corporation, USA

Yamaha Motor Corporation, USA (Yamaha) is recalling certain model year 2014 Yamaha FZ09 motorcycles manufactured August 1, 2013, to August 29, 2014. The affected motorcycles may have a headlight harness that is too short and when the handlebars are turned fully to the left or right the harness may break near the…
European Union 2013–2014

Yamaha MT-09, YP400R, XV950R

null Incorrect assembly of the ABS hydraulic unit may cause total failure of the ABS system. When the ABS function is activated, the braking force will therefore be reduced.
United States

Yamaha Motor Corporation, USA

Yamaha Motor Corporation USA (Yamaha) is recalling certain model year 2009-2013 YZFR1 motorcycles manufactured October 2008 through August 2013 and 2012-2013 XTZ12 motorcycles manufactured October 2011 through August 2013. In the affected motorcycles, use of the headlight may generate enough heat to cause the bulb…
European Union 2010

Yamaha YZF-R1 EC

null The electrical resistance in the harness between the sensors and the electronic control unit of the engine is too high. As a result, false signals are sent to the control unit, which lead to high or unstable idling conditions.
European Union

Yamaha XMax 400

null There may be a problem with the metal sleeve joint of the rear brake tube. As a result the brake tube may detach from the metal sleeve joint, causing a loss of braking force which could lead to an accident.
United States

Yamaha Motor Corporation, USA

Yamaha is recalling certain model year 2011 XC50A (Vino Classic) motorcycles manufactured from April 2011 through August 2011. Due to improper adhesion, the brake shoe linings may separate from the front and rear brake shoes.
United States

Yamaha Motor Corporation, USA

Yamaha Motor Company (Yamaha) is recalling certain model year 2014 XVS950CU (Bolt) motorcycles manufactured March 2013 through June 2013. Slack or sag in the wiring harness may allow it to contact the exhaust manifold causing the wires to melt, and possibly short circuit.
European Union

Yamaha NS50 AEROX

null The carburettor cap guide tube containing the carburettor control cable may break during normal use. Its breakage will not affect the operation of the accelerator directly, but it may allow water or powder to enter the carburettor control cable.
United States

Yamaha Motor Corporation, USA

Yamaha is recalling certain model year 2009 YW125 (Zuma 125) scooters manufactured between July 2008 and April 2009 due to possible improper clearances in the internal fuel pump components. These improper clearances may cause an inadequate supply of fuel.
European Union

Yamaha

null The bolts for the side stand switch may become loose and fall out. This could result in the wrong positioning of the switch, in which case the switch may no longer detect that the side stand is in the down position.
European Union

Yamaha

null The leak protection between the flexible rubber tubes and the metal pipes of the fuel injection system is not adequate as a result of the material used and due to excessively large tolerance limits for the diameter of the rubber tubes. This can result in a gradual loss of fuel.
European Union

Yamaha

null The throttle control cable and the front brake cable may freeze as a result of water penetration, so that they do not return to their starting position by themselves, or are difficult to operate. This could lead to the risk of an accident.
United States

Yamaha Motor Corporation, USA

YAMAHA IS RECALLING CERTAIN MODEL YEAR 2009-2012 XVS95/CT (V STAR 950/V STAR 950 TOURER) MOTORCYCLES, MANUFACTURED FROM OCTOBER 2008 THROUGH AUGUST 2011, AND MODEL YEAR 2007 XVS1300/CT (V STAR 1300/V STAR TOURER) MOTORCYCLES, MANUFACTURED FROM AUGUST 2006 THROUGH MARCH 2007. THERE MAY NOT BE A PROPER SEAL BETWEEN THE… United States

Yamaha Motor Corporation, USA

YAMAHA IS RECALLING CERTAIN MODEL YEAR 2012 XTZ12B/BC (SUPER TENERE) MOTORCYCLES, MANUFACTURED FROM JUNE 01, 2011, THROUGH AUGUST 31, 2011. DURING THE ASSEMBLY PROCESS, THE FUEL PUMP O]RING MAY HAVE BEEN INSTALLED INCORRECTLY IN ITS GROOVE.