Vactormanufacturingllc

January 29, 2020

United States

Vactor Manufacturing LLC

Vactor Manufacturing (Vactor) is recalling certain 2017-2020 Vactor 2100i vehicles manufactured with RECIRC or flusher as original equipment or retrofitted. While in Recirculation (RECIRC) or Flusher mode and then switched to Jetting mode, the safety interlocks may fail resulting in unintentional vehicle movement.

February 22, 2018

United States

Vactor Manufacturing LLC

Vactor Manufacturing (Vactor) is recalling certain 2011-2017 HXX and 2100 Plus vacuum excavator trucks. The hydraulic dump body cylinder can corrode at the threaded joint over time, causing the cylinder to fail when in a dump cycle.

June 5, 2017

United States

Vactor Manufacturing LLC

Vactor Manufacturing (Vactor) is recalling certain 2015-2017 Vactor Jetter vehicles. In certain conditions, the idle may unexpected rise, allowing the affected vehicles to over power the parking brake.

June 16, 2015

United States

Vactor Manufacturing LLC

Vactor Manufacturing (Vactor) is recalling certain model year 2014-2015 Vactor HXX PD, HXX Fan, HXX Prodigy, and 2100 Plus, and Guzzler Guzzcavator trucks manufactured January 10, 2014, to June 2, 2015. The affected vacuum trucks have boilers that may have been assembled with incorrect hardware and/or improper…

March 28, 2014

United States

Vactor Manufacturing LLC

Vactor Manufacturing Inc. (Vactor) is recalling certain model year 2012-2013 HXX-Fan, 2010-2014 HXX-Prodigy, and 2012-2014 HXX-PD and Guzzler Guzzcavator vacuum excavation trucks.

September 16, 2013

United States

Vactor Manufacturing LLC

Vactor Manufacturing is recalling certain model year 2012-2013 Ramjet vehicles equipped with Allison Transmissions. Due to an incorrect transmission software parameter, the vehicle may go into drive mode while in PTO is being used.

April 3, 2013

United States

Vactor Manufacturing LLC

Vactor Manufacturing (Vactor) is recalling certain model year 2012-2013 HXX and Guzzler vacuum trucks equipped with an Alkota water heater. These trucks were not equipped with an oil primary control.

September 16, 2011

United States

Vactor Manufacturing LLC

VACTOR IS RECALLING CERTAIN MODEL YEAR 2010-2011 JETTER-F AND JETTER-V SEWER CLEANERS MANUFACTURED FROM FEBRUARY 2010, THROUGH APRIL 2011. ONE OF THE SAFETY INTERLOCKS THAT ARE BUILT INTO THE UNITS TO PROTECT THE OPERATORS AND ASSURE NO VEHICLE MOVEMENTS CAN HAPPEN DURING SEWER CLEANING OPERATIONS WERE INCORRECTLY…

April 13, 2010

United States

Vactor Manufacturing LLC

VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.

October 6, 2009

United States

Vactor Manufacturing LLC

VACTOR IS RECALLING CERTAIN MODEL YEAR 2004, 2007, AND 2009 VACTOR 2100 AND 2009 VACTOR JETTER SEWER CLEANERS, MANUFACTURED BETWEEN APRIL 1 AND SEPTEMBER 25, 2009. THESE VEHICLES WERE EITHER SUPPLIED WITH OR REFITTED WITH DEFECTIVE HOSE FITTINGS.

August 16, 2007

United States

Vactor Manufacturing LLC

ON CERTAIN SEWER CLEANERS, THERE MAY BE A DEFECT IN THE DEBRIS BODY CYLINDER MOUNT AND SUB-FRAME CROSS TUBE WHERE THE MOUNT ATTACHES THAT COULD RESULT IN A STRUCTURAL FAILURE.