Utilitytrailermanufacturing

August 31, 2021

United States

Utility Trailer Manufacturing Company

Utility Trailer Manufacturing Company (Utility Trailer) is recalling certain 2022 VS2RA trailers. The incorrect tape was installed on the top foil, which could result in the sealer plate separating from the roof.

April 7, 2021

United States

Utility Trailer Manufacturing Company

Utility Trailer Manufacturing Company (Utility Trailer) is recalling certain 2006-2021 VS2DC, VS2DX, VS3DX trailers. The horizontal weld that attaches a mild steel angle to the slider rail for super doubles/pintle hook operations may be missing.

August 1, 2017

United States

Utility Trailer Manufacturing Company

Utility Trailer Manufacturing Company (Utility Trailer) is recalling certain 2017 VS2RA trailers. The weld that secures the mud flap bracket to the suspension beam may allow the mud flap bracket to detach.

September 19, 2016

United States

Utility Trailer Manufacturing Company

Utility Trailer Manufacturing Company (Utility) is recalling certain model year 2015-2017 Flatbed trailers, model FS2CHA, manufactured January 1, 2015, to September 16, 2016, equipped with certain Conestoga XP sliding trailer tarping systems with RAD-style rear closures. In the affected trailers, the rear aerodynamic…

July 5, 2016

United States

Utility Trailer Manufacturing Company

Utility Trailer Manufacturing Company (Utility) is recalling certain model year 2014-2016 FS1CHA, FS1CHS, FS2CDHA, FS2CHA, FS2CHS, FS3CDHA, FS3CHA, FS3CHS, TS1CA, TS2CDHA, TS2CHA, VS1DC, VS1RA, VS2DX, VS2RA, VS2RAP, VS3DX, VS3RA, and VS4DX refrigerated, dry van, and flatbed trailers manufactured January 1, 2014, to…

November 19, 2015

United States

Utility Trailer Manufacturing Company

Utility Trailer Manufacturing Company (Utility Trailer) is recalling certain model year 2015 Refrigerated Van trailers, model VS2RA, manufactured on December 16, 2013, and equipped with certain Meritor EX225L2, EX225L+, or Bendix ADB22X axles. The affected axle assemblies have caliper bolts that may not have been…

February 4, 2015

United States

Utility Trailer Manufacturing Company

Utility Trailer Manufacturing Company (Utility) is recalling certain model year 2014-2015 FS2CHA, VS2DX, VS1DC, VS2RA, and VS1RA trailers manufactured April 14, 2014, to November 4, 2015, equipped with certain Haldex Life Seal Type 30/30 Long Stroke Air Brake Actuators manufactured January 9, 2014, to October 28…

July 30, 2014

United States

Utility Trailer Manufacturing Company

Utility Trailer Manufacturing Company (Utility) is recalling certain model year 2012-2014 VS1RA, and 2013-2014 VS1DC, VS2DX, VS2RA, VS3DX, and VS3RA trailers manufactured April 2011, to May 2013. The pintle hook tube sub assembly that is welded to the pintle hook safety chain loop may break and fall off the vehicle.

April 24, 2014

United States

Utility Trailer Manufacturing Company

Utility Trailer Manufacturing Company (Utility) is recalling certain model year 2015 VS1RA, VS2RA, and VS3RA refrigerated vans manufactured January 6, 2014, through March 14, 2014. The affected trailers may have over-tightened axle nuts which may result in axle bearing failure.

June 26, 2012

United States

Utility Trailer Manufacturing Company

UTILITY MANUFACTURING COMPANY (UTILITY) IS RECALLING CERTAIN MODEL YEAR 2013 UTILITY VS2DX DRY VANS MANUFACTURED FROM MAY 16, 2012, THROUGH JUNE 13, 2012. THE BRAKE SYSTEM CHECK VALVE WAS INSTALLED INCORRECTLY, CAUSING A DELAY IN BRAKE APPLICATION.

January 20, 2012

United States

Utility Trailer Manufacturing Company

UTILITY MANUFACTURING COMPANY (UTILITY) IS RECALLING CERTAIN MODEL YEAR 2011-2012 UTILITY VS1DC AND VS2DX DRY VANS MANUFACTURED FROM DECEMBER 2010 THROUGH AUGUST 2011, AND EQUIPPED WITH AN OPTIONAL LIFTGATE BATTERY BOX. THE MOUNTING PLATES USED FOR MOUNTING SINGLE OR DOUBLE BATTERY BOXES ON TRAILERS MAY BE THE…

March 24, 2011

United States

Utility Trailer Manufacturing Company

UTILITY TRAILER IS RECALLING CERTAIN MODEL YEAR 2011 VS2RA HEAVY DUTY TRUCKS, MANUFACTURED FROM DECEMBER 2010 THROUGH MARCH 2011, EQUIPPED WITH GUNITE AUTOMATIC SLACK ADJUSTERS. DUE TO AN INCOMPLETE "KNITTING" OF THE IRON AT THE TIME OF CASTING, INADEQUATE STRUCTURAL INTEGRITY OF THE SLACK ADJUSTER HOUSING CAN OCCUR…

February 18, 2011

United States

Utility Trailer Manufacturing Company

UTILITY TRAILER IS RECALLING CERTAIN MODEL YEAR 2007-2009 VS2RA AND MODEL YEAR 2008 VS2DX REFRIGERATED AND DRY VANS EQUIPPED WITH ARVINMERITOR AXLES. INSUFFICIENT TORQUE MAY HAVE BEEN APPLIED ON THE SPINDLE NUT ON THE ARVINMERITOR TL SERIES TRAILER AXLES INSTALLED IN THESE VAN TRAILERS WHERE THE STAKE WASHER FOR THE…

November 5, 2010

United States

Utility Trailer Manufacturing Company

UTILITY TRAILER IS RECALLING CERTAIN MODEL YEAR 2011 VS2RA AND VS2DX TRAILERS EQUIPPED WITH ARVIN MERITOR SUSPENSION SYSTEMS. THE SUSPECT SYSTEMS MAY HAVE MISSING WELDS AT THE INTERFACE OF THE LOWER SEAT BRACKET AND AXLE BEAM.

February 5, 2004

United States

Utility Trailer Manufacturing Company

ON CERTAIN TRAILERS EQUIPPED WITH WEBB WHEEL PLATINUM SERIES BRAKE DRUMS, THESE BRAKE DRUMS COULD CRACK ON THE BRAKING SURFACE.

October 7, 2003

United States

Utility Trailer Manufacturing Company

ON CERTAIN TRAILERS EQUIPPED WITH BENDIX EC-30T ELECTRONIC CONTROL UNITS (ECU). IF THE TRAILER-MOUNTED ABS WARNING LAMP CIRCUIT EXPERIENCES AN ELECTRICAL SHORT AND THE SHORT IS NOT REPAIRED, THE HIGH SIDE POWER SWITCH INSIDE THE ECU THAT CONTROLS THE ILLUMINATION OF THE TRAILER-MOUNTED ABS WARNING LAMP MAY EVENTUALLY…

December 3, 2002

United States

Utility Trailer Manufacturing Company

ON CERTAIN DUAL AXLE, REFRIGERATED TRAILERS BUILT WITH AN OPTIONAL PINTLE HOOK ASSEMBLY (PREMIER TYPE) FOR USE IN "SUPER DOUBLES" OPERATIONS, SOME WELDS MAY HAVE BEEN MISSED THAT ATTACH THE REINFORCEMENT CHANNEL TO THE PINTLE HOOK MOUNTING PLATE AT THE REAR SUBFRAME.

August 15, 2002

United States

Utility Trailer Manufacturing Company

ON CERTAIN TRAILERS EQUIPPED WITH SPRING BRAKE CONTROL VALVE ASSEMBLIES, THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND…

May 16, 2002

United States

Utility Trailer Manufacturing Company

ON CERTAIN TRAILERS EQUIPPED WITH BENDIX SR-5 TRAILER SPRING BRAKE VALVE ASSEMBLIES, THE MOLDED RUBBER FACE OF THE INLET/EXHAUST VALVE (I/E VALVE) COMPONENT OF THE AFFECTED VALVES CAN SEPARATE FROM THE VALVE'S METAL INSERT. AIR CAN BE TRAPPED BY A SEPARATED I/E VALVE CAUSING IT TO BALLOON AND BLOCK THE EXHAUST…

June 26, 2001

United States

Utility Trailer Manufacturing Company

VEHICLE DESCRIPTION: TRAILERS EQUIPPED WITH CERTAIN HALDEX BRAKE SYSTEM TWO AND FOUR PORT RELAY VALVES. THE VALVE MAY STICK OPEN WHEN A HIGH-PRESSURE APPLICATION IS RELEASED.