Brands Cars Engines Gearboxes Platforms

SEARCH

Nissan

571 campaigns
  • United States
  • European Union
  • United Kingdom

Safety recalls for Nissan.

571 campaigns

United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2012 TITAN AND ARMADA VEHICLES, MANUFACTURED FROM AUGUST 12, 2011, THROUGH MARCH 13, 2012. THE PART 567 CERTIFICATION LABELS ON THE VEHICLES DO NOT CONTAIN RIM SIZE INFORMATION.
United States

Nissan North America, Inc.

CERTAIN MODEL YEAR 2012 NISSAN TITAN VEHICLES, MANUFACTURED FROM JUNE 10, 2011, THROUGH JULY 22, 2011, EQUIPPED WITH THE SPORTS APPEARANCE PACKAGE HAVE INCORRECT SEATING CAPACITY INFORMATION DISPLAYED ON THE TIRE PLACARD. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO.
European Union

Nissan Passenger car

null The fuel rail pressure sensor may be insufficiently tightened to the fuel rail of the engine and it may loosen gradually due to heat and vibration of the engine. If left undetected and the vehicle continues to be driven in this condition, in an extreme case, fuel leakage may occur between the fuel rail pressure…
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2003-2004 INFINITI M45 VEHICLES MANUFACTURED FROM MARCH 7, 2002, THROUGH JUNE 3, 2004. DUE TO A CIRCUIT BOARD FAILURE, THE FUEL GAUGE MAY READ A FUEL LEVEL HIGHER THAN ACTUALLY EXISTS.
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2011-2012 NISSAN QUEST VEHICLES, MANUFACTURED FROM JULY 29, 2010, THROUGH FEBRUARY 21, 2012. DUE TO SOFTWARE PROGRAMMING, WHILE DRIVING AT SLOW SPEEDS OR IDLING ON A DECLINE WITH ¼ TANK FUEL OR LESS, THERE MAY BE AN INSUFFICIENT SUPPLY OF FUEL TO THE ENGINE.
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2003-2005 INFINITI Q45 VEHICLES. A WIRING CONNECTOR FOR THE SEAT MOUNTED AIRBAG MAY EXPERIENCE INCREASED ELECTRICAL RESISTANCE, RESULTING IN THE NON-DEPLOYMENT OF THE SIDE AIR BAGS.
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2011-2012 JUKE, INFINITI QX AND INFINITI M VEHICLES. THE FUEL PRESSURE SENSORS MAY NOT HAVE BEEN TIGHTENED TO THE CORRECT SPECIFICATION.
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2012 MURANO AND ROGUE VEHICLES, MANUFACTURED FROM NOVEMBER 23, 2011 THROUGH JANUARY 11, 2012. DURING ASSEMBLY, THE TIRE PRESSURE MONITORING SYSTEM (TPMS) WAS NOT ACTIVATED.
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2012 ALTIMA AND VERSA VEHICLES. THESE VEHICLES MAY BE EQUIPPED WITH SIDE CURTAIN AIR BAGS THAT CONTAIN AN INCORRECT PROPELLANT MIXTURE FOR THE INITIATOR COMPONENT USED, RESULTING IN INSUFFICIENT OUTPUT OF COMPRESSED GAS.
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2012 VERSA VEHICLES EQUIPPED WITH AN AUTOMATIC TRANSMISSION AND MANUFACTURED FROM JUNE 9, 2011, THROUGH JANUARY 13, 2012 FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 114,”THEFT PROTECTION.
European Union

Nissan

null Possible disconnection of a sensor bracket from the turbocharger air intake pipe can cause incorrect measurement of the turbocharger boost pressure. As a result, the car may stop suddenly whilst driving, without the possibility to restart, leading to the risk of a road accident.
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2011 INFINITI FX, MODEL YEAR 2012 INFINITI M, MODEL YEAR 2011-2012 NISSAN FRONTIER, MODEL YEAR 2011-2012 NISSAN XTERRA, MODEL YEAR 2011-2012 NISSAN PATHFINDER, AND MODEL YEAR 2012 NISSAN NV VEHICLES. SOME OF THE BOLTS THAT CONNECT THE ENGINE OIL COOLER AND THE ENGINE OIL FILTER…
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2010-2011 SENTRA VEHICLES EQUIPPED WITH MR20 ENGINES, MANUFACTURED FROM MAY 11, 2010, TO MAY 22, 2010, AND JULY 8, 2010, TO OCTOBER 25, 2010. THE ZINC COATING APPLIED TO THE TERMINAL STUD BOLT WAS THICKER THAN SPECIFICATION.
European Union

Nissan.

null A potential out-of-specification casting dimension on the heat sink of the electric power steering (EPS) control unit has been identified. As a result of this dimensional issue, with continued use and in extreme cases, the EPS motor may no longer function.
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2011 NISSAN JUKE VEHICLES MANUFACTURED FROM APRIL 9, 2010, THROUGH MAY 12, 2011. THE TURBOCHARGER BOOST SENSOR BRACKET MAY SEPARATE FROM THE AIR INLET TUBE DUE TO A DEFECTIVE WELD.
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2011 ROGUE VEHICLES MANUFACTURED FROM AUGUST 17, 2010, THROUGH OCTOBER 30, 2010. THE CIRCUIT BOARD MAY NOT HAVE BEEN INSTALLED IN THE CORRECT POSITION ON CERTAIN ELECTRIC POWER STEERING (EPS) ASSIST CONTROL UNITS.
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2011 AND 2012 INFINITI G37 COUPE VEHICLES AND CERTAIN MODEL YEAR 2011 NISSAN 370Z VEHICLES MANUFACTURED FROM JULY 2, 2011, THROUGH AUGUST 29, 2011. DUE TO A PROGRAMMING ERROR, THE POWER WINDOW SWITCH CONTROLLER IN THE SUBJECT VEHICLES WAS MANUFACTURED OUT OF SPECIFICATION.
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2012 NISSAN ALTIMA VEHICLES MANUFACTURED FROM JUNE 15, 2011, THROUGH JUNE 21, 2011 AND MODEL YEAR 2012 NISSAN NV VEHICLES MANUFACTURED FROM JUNE 23, 2011, THROUGH JUNE 28, 2011 BECAUSE THE AIR BAG CONTROL UNIT (ACU) WAS ASSEMBLED INCORRECTLY.
European Union

Nissan

null The product poses a risk of injuries because the brake pipe may be perforated and this can cause a brake fluid leak. If the vehicle continues to be driven in this condition, this may result in a reduction of brake performance.
United States

Nissan North America, Inc.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2011-2012 NISSAN ALTIMA SEDAN VEHICLES MANUFACTURED FROM APRIL 25, 2011, THROUGH JUNE 10, 2011 AT THE CANTON, MISSISSIPPI PLANT. THE TRANSVERSE LINK BOLT MAY NOT HAVE BEEN TORQUED TO THE PROPER SPECIFICATION.