United States 02V176000
Indian Motorcycle Company
The problem
ON CERTAIN MOTORCYCLES, THE PINCH BOLTS THAT CLAMP THE FRONT FORKS TO THE AXLE MAY BE 1/4" BOLTS OR 5/16" BOLTS MADE OF STAINLESS STEEL. IN BOTH CASES, THESE BOLTS MAY NOT BE OF SUFFICIENT STRENGTH OVER TIME TO CLAMP THE FRONT FORK TO THE AXLE TIGHTLY ENOUGH TO PREVENT AXLE ROTATION.
Risk
IF THE AXLE IS ALLOWED TO ROTATE, THE AXLE COULD COME OUT OF THE RIGHT FRONT FORK, COLLAPSING THE FRONT END, INCREASING THE RISK OF A CRASH.
What owners should do
DEALERS WILL INSPECT THE FRONT FORKS TO DETERMINE WHETHER THE PINCH BOLTS ARE 1/4" OR 5/16" BOLTS MADE OF STAINLESS STEEL. IF THE FORKS ARE CLAMPED WITH 1/4" BOLTS, THE DEALER WILL REPLACE THE FORKS WITH FORKS DESIGNED WITH 5/16" BOLTS. IF THE FORKS ARE CLAMPED WITH 5/16" STAINLESS STEEL PINCH BOLTS, THE DEALER WILL REPLACE THE BOLTS WITH 5/16" BOLTS MADE OF ZINC PLATED STEEL. OWNER NOTIFICATION BEGAN JULY 9, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INDIAN AT 1-408-846-7228.
Units 1189