Brands Cars Engines Gearboxes Platforms

SEARCH

Macktrucks

429 campaigns
  • United States
  • European Union
  • United Kingdom

Safety recalls for Macktrucks.

429 campaigns

United States

Mack Trucks, Inc.

ON CERTAIN TRUCKS, THE BRAKE CAM TUBES ON THE STEER AND DRIVE AXLES MAY NOT HAVE BEEN GREASED.
United States

Mack Trucks, Inc.

CERTAIN TRUCKS EQUIPPED WITH THE TRI-DRIVE OPTION FAIL TO COMPLY WITH THE PERFORMANCE CRITERIA REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, 'AIR BRAKE SYSTEMS.
United States

Mack Trucks, Inc.

CERTAIN TRUCKS EQUIPPED WITH A FRONT GLAD HAND OPTION FAIL TO COMPLY WITH THE PERFORMANCE CRITERIA REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, 'AIR BRAKE SYSTEMS.
United States

Mack Trucks, Inc.

ON CERTAIN TRUCKS, THE FUEL LINE CROSSOVER BRACKET MAY PREMATURELY FAIL AND UNEXPECTEDLY FALL TO THE ROAD. THE LOCATION AND SIZE OF THE BRACKET DRAWS A CONCERN TO THE BRACKET BEING PICKED UP AND THROWN BY THE DRIVE AXLE WHEELS.
United States

Mack Trucks, Inc.

ON CERTAIN TRUCKS EQUIPPED WITH A LEGRIS AIR MANIFOLD, THE BRASS PUSH-TO-CONNECT CARTRIDGE MAY UNEXPECTEDLY SEPARATE FROM THE PLASTIC HOUSING.
United States

Mack Trucks, Inc.

ON CERTAIN TRUCKS EQUIPPED WITH SR-7 BENDIX BRAKE VALVES, THE CHECK VALVE INSIDE THE VALVE CAVITY MAY NOT PROPERLY SET, CAUSING INTERNAL AIR LEAKAGE. IF THE CHECK VALVE DOES NOT PROPERLY SEAT, THE RESULTING LEAKAGE CAN CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER OPERATOR PULLS THE…
United States

Mack Trucks, Inc.

ON CERTAIN TRUCKS, AN AIR SYSTEM HOSE WAS INSTALLED RATHER THAN THE REQUIRED HIGH-PRESSURE POWER STEERING HOSE BETWEEN THE MAIN AND SLAVE STEERING GEAR.
United States

Mack Trucks, Inc.

ON CERTAIN DIESEL POWERED HEAVY DUTY TRUCKS, THE BOLTS ATTACHING THE FUEL TANK MOUNTING BRACKETS TO THE FRAME MAY HAVE INSUFFICIENT TORQUE AND THEREFORE MAY RESULT IN PREMATURE FAILURE OF THE FUEL TANK MOUNTING.
United States

Mack Trucks, Inc.

ON CERTAIN TRUCKS EQUIPPED WITH ARVINMERITOR SERIES 145 AND 160 REAR DRIVE AXLES. SOME OF THE SPINDLES WERE OVERHEATED DURING THE HEAT TREAT PROCESS WHICH COULD RESULT IN A FRACTURE OF THE SPINDLE.
United States

Mack Trucks, Inc.

ON CERTAIN VEHICLES, THE BRAKE CAM TUBES ON THE STEER AND DRIVE AXLES MAY NOT HAVE BEEN GREASED. United States

Mack Trucks, Inc.

ON CERTAIN VEHICLES, THE BRAKE CAM TUBES ON THE STEER AND DRIVE AXLES MAY NOT HAVE BEEN GREASED. United States

Mack Trucks, Inc.

ON CERTAIN VEHICLES. THE BRAKE CAM TUBES ON THE DRIVE AXLE MAY NOT HAVE BEEN GREASED. United States

Mack Trucks, Inc.

ON CERTAIN VEHICLES, THE BRAKE CAM TUBES ON THE STEER AXLE MAY NOT HAVE BEEN GREASED.
United States

Mack Trucks, Inc.

ON CERTAIN TRUCKS, THE BOLT THAT ATTACHES THE PITMAN ARM TO THE STEERING GEAR MAY NOT BE TIGHTENED PROPERLY. United States

Mack Trucks, Inc.

ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS, THE BOLTS THAT ATTACH THE STEERING GEAR TO THE FRAME MAY NOT BE TIGHTENED PROPERLY.
United States

Mack Trucks, Inc.

ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH FXL AXLES, THERE IS A POTENTIAL THAT THE DRAGLINK MAY CONTACT THE BRAKE SLACK ADJUSTER DURING FULL WHEEL CUT AND ARTICULATION OF THE CHASSIS. United States

Mack Trucks, Inc.

ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH HOLLAND AIR SUSPENSION SYSTEMS, A TRANSVERSE BEAM CASTING MAY FRACTURE UNDER NORMAL LOADS. IF A CASTING BREAKS WHEN THE VEHICLE IS TRAVELING ON A ROADWAY THERE IS THE POTENTIAL FOR PIECES OF THE CASTING TO BECOME PROJECTILES AND THE SUSPENSION'S TRANSVERSE BEAM MAY…
United States

Mack Trucks, Inc.

ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS, THERE IS A SLACK ON THE BRAKE ASSEMBLY'S ADJUSTER AND IT IS INTERFERING WITH THE AXLE HOUSING.
United States

Mack Trucks, Inc.

ON CERTAIN HEAVY DUTY CLASS 8 VEHICLES BUILT WITH SHEPPARD MODEL M100 STEERING GEAR, THE STEERING GEAR MOUNTING PADS, WHICH ATTACH THE STEERING GEAR TO THE FRAME RAIL, MAY FAIL.
United States

Mack Trucks, Inc.

ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH ACCURIDE ALUMINUM WHEELS, THE WHEELS WERE NOT PROPERLY PRE-STRESSED. THIS ALLOWS CRACKS TO DEVELOP OVER TIME.