Kawasaki

March 3, 2022

United States

Kawasaki Motors Corp., U.S.A.

Kawasaki Motors Corp. , U.

December 24, 2021

European Union 2019

Kawasaki W800

During the process of assembling , it is possible that the manifold attachment parts were not tightened with the required torque. As a consequence, fixing elements on the exhaust manifold may become detached and fall onto the road increasing the risk of accidents.

October 18, 2021

United States

Kawasaki Motors Corp., U.S.A.

Kawasaki Motors Corp. , U.

September 17, 2021

European Union 2018–2020

Kawasaki Ninja H2 SX, Ninja SX SE, Ninja SX SE+

An insufficient amount of bearing grease might have been applied to the needle-bearings in the rear hub housing (roller bearings), during the manufacturing process. Consequently, the bearings might become damaged, leading to the blockage of the rear wheel while the vehicle is in motion, increasing the risk of an…

July 30, 2021

United States

Kawasaki Motors Corp., U.S.A.

Kawasaki Motors Corp. , U. United States

Kawasaki Motors Corp., U.S.A.

Kawasaki Motors Corp. , U.

April 23, 2021

European Union 2018–2019

Kawasaki Ninja H2 SX/ SX SE/ SX SE+

The gear wheels may break due to restrictions on the gear shifting. This could lead to obstruction of the drivetrain, increasing the risk of an accident.

December 11, 2020

United States

Kawasaki Motors Corp., U.S.A.

Kawasaki Motors Corp. , U.

November 20, 2020

United States

Kawasaki Motors Corp., U.S.A.

Kawasaki Motors Corp. , U.

November 3, 2020

United States

Kawasaki Motors Corp., U.S.A.

Kawasaki Motors Corp. , U.

July 17, 2020

European Union 2019–2020

Kawasaki NINJA ZX-10R, NINJA ZX-10RR

Misprogamming of the engine control unit (ECU) may result in ‘after-fire’ of the engine at high engine load and simultaneous use of the Kawasaki Quick Shifter (KQS). This may cause damage to the engine and lead to fire due to the high temperature of the exhaust gas.

May 27, 2020

United States

Kawasaki Motors Corp., U.S.A.

Kawasaki Motors Corp. , U.

February 8, 2019

European Union 2018

Kawasaki ZR900

Owing to incorrect installation, the rear wheel brake line and/or the ABS sensor cable can be damaged through contact with the rear wheel. This can lead to failure of the rear wheel brake and the ABS, which could lead to an accident. United States

Kawasaki Motors Corp., U.S.A.

Kawasaki Motors Corp. , U.

December 6, 2018

United States

Kawasaki Motors Corp., U.S.A.

Kawasaki Motor Corp. , U.

November 30, 2018

European Union 2018

Kawasaki Ninja H2 SX

The main stand may flip open during travel because of an error in the safeguard mechanism manufacturing process. This could lead to an increased risk of accidents.

August 30, 2018

United States

Kawasaki Motors Corp., U.S.A.

Kawasaki Motors Corp. , U.

February 23, 2018

European Union 2016–2018

Kawasaki Ninja ZX-10R / RR

The strength of some gears in the transmission may not be sufficient The gears could break if they receive excessive impact force during shifting.

February 1, 2018

United States

Kawasaki Motors Corp., U.S.A.

Kawasaki Motors Corp. , U.

January 19, 2018

European Union 2017

Kawasaki Versys-X 300

Because of vibrations, the socket of the brake/rear-light bulb may fall out of the lamp assembly, resulting in failure of the rear light. If the rear lights fail, the vehicle is no longer adequately visible from the rear, especially when visibility is poor.