Harleydavidson

July 20, 2010

United States

Harley-Davidson Motor Company

HARLEY-DAVIDSON IS RECALLING CERTAIN MODEL YEAR 2010 FXDF MOTORCYCLES WITH FORK LEG ASSEMBLIES (LH P/N 48622-08, RH P/N 48623-08) MANUFACTURED FROM JANUARY 29 THROUGH FEBRUARY 9, 2010. THESE FORK LEG ASSEMBLIES MAY HAVE BEEN INCORRECTLY ASSEMBLED USING THE WRONG SPRINGS.

March 12, 2010

European Union

Harley-Davidson

The product poses a risk of fire because, in the event of a frontal collision that results in severe frame damage, the fuel tank front mounts may distort in a manner that may cause a fuel leak. In the presence of an ignition source, this may result in a fire.

December 1, 2009

United States

Harley-Davidson Motor Company

HARLEY-DAVIDSON IS RECALLING CERTAIN MODEL YEAR 2009 AND 2010 TOURING FAMILY MOTORCYCLES, INCLUDING CVO TOURING AND TRIKE PRODUCTS, MANUFACTURED FROM JUNE 6, 2008 THROUGH NOVEMBER 19, 2009. THE FRONT FUEL TANK MOUNTS MAY DISTORT IN REACTION TO SEVERE FRAME DAMAGE FROM A FRONTAL COLLISION.

August 28, 2009

European Union

HARLEY-DAVIDSON

The product poses a risk of injuries because wheel failure may occur during use if the wheels have developed cracks during the manufacturing process.

August 7, 2009

European Union

Harley-Davidson

The product poses a risk of injuries because the acorn stud at the brake reaction link may work loose and fall out during use. If this occurs, the front brake and fender assembly would no longer be adequately retained.

July 10, 2009

United States

Harley-Davidson Motor Company

HARLEY DAVIDSON IS RECALLING 1,759 MY 2009 FLTRSE3 MOTORCYCLES EQUIPPED WITH BLADE REAR WHEEL ACCESSORY KITS. SOME WHEELS WITHIN THE SUBJECT POPULATION UNDERWENT A SECONDARY HEAT TREATMENT PROCESS.

June 10, 2009

United States

Harley-Davidson Motor Company

HARLEY DAVIDSON IS RECALLING 11,005 FLSTSB, FXSTSSE2, AND FXSTSSE3 MY 2008 AND 2009 MOTORCYCLES. THE ACORN STUD AT THE BRAKE REACTION LINK MAY FALL OUT DURING USE.

April 2, 2009

United States

Harley-Davidson Motor Company

BUELL DISTRIBUTION COMPANY IS RECALLING 3,316 MY 2008 1125R, MY 2009 XB12R AND XB12SCG MOTORCYCLES. THE SUBJECT MOTORCYCLES HAVE A FRONT BRAKE LINE WHICH MAY CONTACT THE FRONT TIRE.

February 27, 2009

European Union

HARLEY-DAVIDSON

The product poses a risk of injuries because of a positive defect in the welding of the jiffy stand spring anchor which may prevent the jiffy stand assembly from retracting as intended. This condition could lead to a crash causing injury or death to the rider.

December 15, 2008

United States

Harley-Davidson Motor Company

HARLEY-DAVIDSON IS RECALLING 3,285 MY 2009 FXD, FXDF, FXDC, FXDL, AND FXDB MOTORCYCLES. THE JIFFY STAND SPRING ANCHOR MAY HAVE BEEN BUILT WITH A DEFECTIVE WELD THAT MAY ALLOW THE JIFFY STAND ASSEMBLY TO NOT RETRACT AS INTENDED.

November 26, 2008

United States

Harley-Davidson Motor Company

HARLEY-DAVIDSON IS RECALLING 349 MY 2009 FXDB, FXDC, FXDF, AND FXDL MOTORCYCLES. THESE MOTORCYCLES HAVE A FUEL TANK VENT TUBE ASSEMBLY, PART NO.

September 19, 2008

European Union

HARLEY-DAVIDSON

The product poses a risk of injuries because the fuel filter shell may crack leading to a loss of fuel pressure. This loss of pressure can reduce performance and, in some cases, may cause the engine to stall, or a no-start condition which could lead to a crash.

July 30, 2008

United States

Harley-Davidson Motor Company

HARLEY DAVIDSON IS RECALLING 47,579 MY 2008 FLHP, FLHPE, FLHR, FLHRC, FLHRSE4, FLHT, FLHTC, FLHTCU, FLHTCUSE3, FLHTP, FLHX, AND FLTR MOTORCYCLES. THESE MOTORCYCLES MAY EXPERIENCE A CRACKING OF THE FUEL FILTER SHELL LEADING TO LOSS OF FUEL PRESSURE.

February 27, 2008

United States

Harley-Davidson Motor Company

HARLEY-DAVIDSON IS RECALLING 5,947 MY 2005-2007 FLHP, FLHPI, FLHTP, FLHTPI, FLHPE AND FLHPEI POLICE AND ESCORT MOTORCYCLES EQUIPPED WITH ANTI-LOCK BRAKE SYSTEMS (ABS). INCONSISTENCIES IN THE ROUTING OF THE BRAKE LINES CAN CAUSE ABRASION OF THE BRAKE LINES AND HOSES.

November 20, 2007

United States

Harley-Davidson Motor Company

ON CERTAIN MOTORCYCLES BUILT AND SHIPPED TO CALIFORNIA, THE CATALYTIC MUFFLER PROTECTIVE HEAT SHIELD WAS NOT INSTALLED. THIS CONDITION COULD ALLOW DIRECT CONTACT WITH THIS MUFFLER AND CAUSE INJURY.

November 9, 2007

European Union

HARLEY DAVIDSON

This product poses a risk of burns because it has been designed and built with a condition whereby the pant leg of some riders can have direct contact with the exhaust pipe. This condition could cause the pant leg to burn, which could lead to the possibility of burns to the rider.

July 17, 2007

United States

Harley-Davidson Motor Company

CERTAIN MOTORCYCLES WERE BUILT WITH A CONDITION WHEREBY THE PANT LEG OF SOME RIDERS CAN HAVE DIRECT CONTACT WITH THE EXHAUST PIPE.

July 11, 2007

United States

Harley-Davidson Motor Company

CERTAIN MOTORCYCLES WERE BUILT WITH A CONDITION WHEREBY THE PANT LEG OF SOME RIDERS CAN HAVE DIRECT CONTACT WITH THE EXHAUST PIPE.

June 29, 2007

European Union

HARLEY-DAVIDSON

The product poses a serious risk of fire because the positive cable from the battery could come into contact with the weld bead of the petrol tank. This may cause the weld bead to wear away the cable insulation, causing the battery to short-circuit via the petrol tank and the petrol lines.

April 26, 2007

United States

Harley-Davidson Motor Company

CERTAIN MOTORCYCLES WERE BUILT WITH A CONDITION THAT PERMITS THE POSITIVE BATTERY CABLE TO CONTACT A WELD BEAD ON THE OIL TANK. THIS MAY CAUSE THE WELD BEAD TO ABRADE THROUGH THE INSULATION ON THE CABLE AND CAUSE AN ELECTRICAL SHORT FROM THE BATTERY THROUGH THE OIL TANK AND OIL LINES.