Bigtextrailermanufacturing

February 28, 2025

United States

Big Tex Trailer Manufacturing, Inc.

Big Tex Trailer Manufacturing, Inc. (Big Tex Trailer) is recalling certain 14RB, 14RD, 16RB, and 16RD trailers.

March 29, 2024

United States

Big Tex Trailer Manufacturing, Inc.

Big Tex Trailer Manufacturing, Inc. (Big Tex Trailer) is recalling certain 2024 25GN, 25PH, 3XGN, and 3XPH trailers.

November 21, 2023

United States

Big Tex Trailer Manufacturing, Inc.

Big Tex Trailer Manufacturing, Inc. (Big Tex Trailer) is recalling certain 2024 trailers with defective Goodride ST 200 tires.

July 11, 2022

United States

Big Tex Trailer Manufacturing, Inc.

Big Tex Trailer Manufacturing, Inc. (Big Tex Trailer) is recalling certain 2003-2022 16GN trailers.

April 8, 2022

United States

Big Tex Trailer Manufacturing, Inc.

Big Tex Trailer Manufacturing, Inc. (Big Tex Trailer) is recalling certain 2022 50SR and 70SR trailers.

October 17, 2013

United States

Big Tex Trailer Manufacturing, Inc.

Big Tex Trailer Manufacturing (Big Tex) is recalling certain model year 2013-2014 10PI, 12PI, 14PI, 29SA, 30AA, 30LS, 30SA, 30SV, 35AA, 35LS, 35SA, 35SV, 45LA, 45SS, 50LA, 50SA, 60SP, 70LR, 70PI, 70SP, and 70TV utility trailers manufactured March 2013, through September 30, 2013. The affected trailers are equipped…

April 9, 2012

United States

Big Tex Trailer Manufacturing, Inc.

BIG TEX IS RECALLING CERTAIN MODEL YEAR 2012 22GN AND 25GN TRAILERS EQUIPPED WITH A DEXTER AXLE ELECTRIC/HYDRAULIC (E/H) BRAKE ACTUATOR PUMP. THIS PUMP MAY NOT HAVE BEEN PROPERLY HEAT TREATED.

June 15, 2011

United States

Big Tex Trailer Manufacturing, Inc.

BIG TEX IS RECALLING CERTAIN MODEL YEAR 2011 10LP, 10LX, 12LP, 12LX, 14GX, 14LX, 14OD, 50DS AND 70LP DUMP TRAILERS MANUFACTURED FROM FEBRUARY 24, 2011, THROUGH JUNE 6, 2011, AND EQUIPPED WITH BRENNAN HYDRAULIC HOSE ADAPTER FITTINGS. THE ADAPTER FITTINGS HAVE BEEN IDENTIFIED AS BEING DEFECTIVE IN THAT THEY MAY CAUSE A…

June 1, 2010

United States

Big Tex Trailer Manufacturing, Inc.

BIG TEX IS RECALLING CERTAIN MODEL YEAR 2010 14GX AND 14LX DUMP TRAILERS MANUFACTURED FROM MARCH 20 THROUGH MAY 11, 2010. THE 7' RAMPS USED FOR LOADING AND UNLOADING EQUIPMENT ARE NOT SUFFICIENT IN STRENGTH FOR THE WEIGHT LOADS OF THE TRAILERS.

July 17, 2007

United States

Big Tex Trailer Manufacturing, Inc.

ON CERTAIN FLATBED UTILITY TRAILERS, THERE IS AN INSUFFICIENT WELD OF THE RAMP HANGER POCKETS THAT STORE THE RAMPS WHEN NOT IN USE ON THE LEFT AND RIGHT UNDERSIDE OF THE TRAILER BED. IF THE WELD IS INSUFFICIENT, IT COULD CAUSE THE RAMP HANGER POCKET TO DETACH, DROPPING THE RAMP TO THE GROUND OR ROADWAY.