
Buick Electra 7.5 V8 (205 Hp) Turbo Hydra-matic vs Buick Super Series 50 4.1 V8 (110 Hp)
Compare up to three variants side by side. Add cars from specs pages or pick a model below.
No cars in comparison yet
Open a model specs page and tap Compare, or browse the catalog to add a car.
Browse cars| Specification | 7.5 V8 (205 Hp) Turbo Hydra-matic | Series 50 4.1 V8 (110 Hp) | — |
|---|---|---|---|
| Overview | |||
| Generation | Gen 1 | Gen 2 | — |
| Year | 1975–1976 | 1945–1947 | — |
| Platform | GM C-Body | GM C-Body | — |
| Variant | 7.5 V8 (205 Hp) Turbo Hydra-matic | Series 50 4.1 V8 (110 Hp) | — |
| Body type | coupe | cabriolet | — |
| Engine type | Fuel | Fuel | — |
| Fuel type | Petrol | Petrol | — |
| Seats | 5 | 2 | — |
| Doors | 2 | 6 | — |
| Power & torque | |||
| Power | 205 HP | 110 HP | — |
| Power @ max rpm | 3800 rpm | 3600 rpm | — |
| Torque | 468 Nm (345 lb-ft) | 279 Nm (206 lb-ft) | — |
| Torque @ max rpm | 2000 rpm | 2000 rpm | — |
| Engine | |||
| Engine code | Buick 455 | Buick 248 | — |
| Displacement | 7456 cc | 4064 cc | — |
| Cylinders | 8 | 8 | — |
| Configuration | V Engine | inline | — |
| Bore | 110 mm (4.3 in) | 79 mm (3.1 in) | — |
| Stroke | 99 mm (3.9 in) | 105 mm (4.1 in) | — |
| Compression ratio | 7.9 | — | — |
| Valves per cylinder | 2 | 2 | — |
| Injection system | carburettor | carburettor | — |
| Aspiration | Naturally Aspirated Engine | Naturally Aspirated Engine | — |
| Valvetrain | ohv | ohv | — |
| Engine layout | Front Longitudinal | Front Longitudinal | — |
| Oil capacity | — | 5.2 L | — |
| Coolant | — | 12.3 L | — |
| Drivetrain & transmission | |||
| Drive | Rear Wheel Drive | Rear Wheel Drive | — |
| Powertrain architecture | Internal Combustion Engine | Internal Combustion Engine | — |
| Drivetrain architecture | The Internal Combustion Engine Ice Drives The Rear Wheels Of The Vehicle | The Internal Combustion Engine Ice Drives The Rear Wheels Of The Vehicle | — |
| Gearbox type | Torque Converter | Torque Converter | — |
| Gears | 3 | 2 | — |
| Gearbox code | thm400 | dynaflow | — |
| Gearbox manufacturer | gm | gm | — |
| Dimensions | |||
| Length | 5,928 mm (233.4 in) | 5,398 mm (212.5 in) | — |
| Width | 2,029 mm (79.9 in) | 1,996 mm (78.6 in) | — |
| Height | 1,372 mm (54 in) | 1,648 mm (64.9 in) | — |
| Wheelbase | 3,226 mm (127 in) | 3,150 mm (124 in) | — |
| Front track | 1,610 mm (63.4 in) | — | — |
| Rear track | 1,626 mm (64 in) | — | — |
| Boot space | 586 L (20.7 cu ft) | — | — |
| Mass | |||
| Kerb weight | 2,112 kg (4,656 lbs) | 1,837 kg (4,050 lbs) | — |
| Consumption & emissions | |||
| Fuel tank | 82.0 L (21.7 US gal) | 72.0 L (19 US gal) | — |
| Chassis & brakes | |||
| Front suspension | Coil Spring Transverse Stabilizer | Independent Coil Spring | — |
| Rear suspension | Coil Spring | Rigid Axle Suspension | — |
| Front brakes | disc | Drum, 304.8x44.45 mm | — |
| Rear brakes | drum | Drum, 304.8x44.45 mm | — |
| Power steering | Hydraulic Steering | — | — |
| Tire size | 225/75 R15 | — | — |
| Steering type | — | Cone Worm With Recirculation Balls | — |
| Efficiency ratios | |||
| Weight-to-power | 10.3 kg/Hp, 97.1 Hp/tonne | 16.7 kg/Hp, 59.9 Hp/tonne | — |
| Weight-to-torque | 4.5 kg/Nm, 221.6 Nm/tonne | 6.6 kg/Nm, 151.9 Nm/tonne | — |
| Other | |||
| Start Of Production | 1975 | 1945 | — |
| End Of Production | 1976 | 1947 | — |
| Length In | 233.4 | 212.5 | — |
| Width In | 79.9 | 78.6 | — |
| Height In | 54 | 64.9 | — |
| Wheelbase In | 127 | 124 | — |
| Front Track In | 63.4 | — | — |
| Rear Back Track In | 64 | — | — |
| Kerb Weight Lbs | 4656 | 4050 | — |
| Torque Lbft | 345 | 206 | — |
| Trunk Boot Space Min Cuft | 20.7 | — | — |
| Fuel Tank Capacity Gal | 21.7 | 19 | — |
